Digi3D

Orden FORZAR_AREA

Esta orden selecciona un código y espera a que el usuario finalice una línea cerrada con dicho código. Si el área de dicha línea está dentro de los criterios indicados en los parámetros, se mostrará un globo con un texto informativo al usuario al estilo "No es necesario registrar esta entidad" o se selecciona un código alternativo (de punto por ejemplo) e invita al usuario a digitalizar un área con dicho código.

Funciona de dos modos:                        

forzar_area=[operador <,<=;=;>=;>][area][código de líneas][código de puntual][mensaje][código de centroide]

forzar_area=[operador <,<=;=;>=;>][area][código de líneas][""][mensaje][código de centroide]

El primer caso para digitalizar un centroide en caso de que el area de la línea digitalizada no supere la prueba [operador][area]

y el segundo para mostrar un mensaje al usuario y no hacer nada.

This command works by defining several parameters on the command line, it selects a code

and waits for the user to close the area feature. If the area dimensions meet the criteria

indicated by parameters, the program will show a pop up with the defined message, or it can

execute an other task such as select an other code (for example a puntual code) that will

invite the user with a pop up to digitize the area.

The command work in two ways:

DEFINE_DRAW_AREA=[operator <,<=;=;>=;>][area][line codes][punctual

code][message][centroid code]

DEFINE_DRAW_AREA=[operator <,<=;=;>=;>][area][line

codes][""][message][centroid code]

In the first case is used to digitize a centroid in case the registered area does not m eet the

requirement [operator][area]

in the second case to just show a information message to the user.

For example:

DEFINE_DRAW_AREA=">= 15625 BBH130 '' 'This area feature does not need to be

digitized' CBH130"

This one means:

The user will start the registration of the area. If the area that is just being registered with

the command BBH130 is less than 15625 square meters, the message "This area does not

need to be digitized." will pop up. The area feature is deleted and automatically the

corresponding punctual code is activated in order for the user to register the Reservoir with a

Punctual code.

DEFINE_DRAW_AREA=">= 15625 BBA050 PBA050 'The feature has been saved

with the punctual code' CBA050"

This example means:

The user starts with the area feature registration with the codes BBA050 and PBA050, if this

area dimension is less than 15625 square meters the message "The feature has been saved

with the punctual code" CBA050.

Fecha última modificación: 20 de julio, 2009